Seo-NTN Driveshaft USA CORP.
Seo-NTN Driveshaft USA CORP.
AST Bearings   CYSD Bearings   FAG Bearings  
English
English
  • Home
  • Stock Categories
    • AST Bearings
    • CYSD Bearings
    • FAG Bearings
    • FBJ Bearings
    • FYH Bearings
    • IKO Bearings
    • INA Bearings
    • ISB Bearings
    • ISO Bearings
    • KOYO Bearings
    • NACHI Bearings
    • NBS Bearings
    • NKE Bearings
    • NSK Bearings
    • NTN Bearings
    • SKF Bearings
    • SNR Bearings
    • Timken Bearings
    • Toyana Bearings
    • ZEN Bearings
    • compact tapered roller bearing units
    • Air conditioning compressor bearing
    • Air Conditioning bearing
    • Air Compressors bearing
    • 6203 ntn Bearing
    • Ntn 6210 Bearing
    • Ntn 7206 Bearing
    • Timken 399a Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Deep Groove Ball Bearings
    • Thk Linear Motion
    • Thk Linear Bearings And Rails
    • Curved Linear Guide
    • High Temperature Linear Guide
    • Thk Linear Guide Rails
    • Thk Miniature Linear Guide
    • Thk Linear Guide
  • Technical Articles
  • AST Bearings
  • CYSD Bearings
  • FAG Bearings
✖

Home

Stock Categories

Technical Articles

AST Bearings

CYSD Bearings

FAG Bearings

Home>Products>compact tapered roller bearing units>HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications

  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications
  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications
  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications
  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications
  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications
  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications

category

compact tapered roller bearing units

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications SPECIFICATIONS

  • What are the dimensions of a 17mm d HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications? compact tapered roller bearing units Manufacturing Service . Get Your Free, Instant Seo-NTN Driveshaft USA CORP. Quote‎！

  • HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588

  • LM501300
  • LM501349
  • LM501314
  • Imperial
  • 0.4 Kg
  • Stamped Steel
  • 41.275 mm
  • 73.431 mm
Seo-NTN Driveshaft USA CORP.

Seo-NTN Driveshaft USA CORP.China

  • Seo-NTN Driveshaft USA CORP.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications Codes and sizes

  • LM501300
  • LM501349
  • LM501314
  • Imperial
  • 0.4 Kg
  • Stamped Steel
  • 41.275 mm
  • 73.431 mm
  • 19.812 mm
  • 16.604 mm
  • 21.430 mm
  • 3.560 mm
  • 0.76 mm
  • 48.01 mm
  • 54.10 mm
  • 71.10 mm
  • 65.02 mm
  • 1.8 mm
  • 0.3 mm
  • -3.3 mm
  • 4360 lbf
  • 16800 lbf
  • 16700 lbf
  • 2980 lbf
  • 1.46
  • 0.4
  • 1.5
  • 23.3
  • 13.3
  • 0.0739

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588 HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications Code system

With Industry Standards compact tapered roller bearing units

No.BranddBDTCRrNoun
HM124646/HM124616XD+HM124646XCTimken119,062 mm - 194,873 mm125,255 mm131,351 mm1,5 mm1 mm -
HM124646/HM124618XDTimken119,062 mm - 195,262 mm136,779 mm142,875 mm1,5 mm1 mm -
HM124646-2TIMKEN4.688 Inch | 119.075 Millimeter2.25 Inch | 57.15 Millimeter0 Inch | 0 Millimeter - - - - Cone
HM124646-90014TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90013TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90047TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90057TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90056TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90065TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90068TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing
HM124646-90071TIMKEN4.688 Inch | 119.075 Millimeter - 7.688 Inch | 195.275 Millimeter - - - - Bearing

 

M241547-90070 M241513D Oil hole and groove on cup - E37462 Tapered Roller Bearings AssemblySeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
Backing ring K85095-90010 Tapered Roller Bearings AssemblySeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM124646-90132 HM124616XD Cone spacer HM124646XC Backing ring K85588-90010 compact tapered roller bearing unitsSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM129848-90176 HM129813XD Cone spacer HM129848XB Timken Ap Bearings Industrial ApplicationsSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM136948-90304 HM136916D Oil hole and groove on cup - E31319 Timken Ap Bearings Industrial ApplicationsSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM136948-90344 HM136916D Oil hole and groove on cup - E30994 AP Bearings for Industrial ApplicationSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM129848-90218 HM129813XD Cone spacer HM129848XB Backing ring K85095-90010 AP Bearings for Industrial ApplicationSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM124646-90116 HM124616XD Cone spacer HM124646XC Timken AP Bearings AssemblySeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM127446 HM127417XD Cone spacer HM127446XB AP TM ROLLER BEARINGS SERVICESeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM124646-90140 HM124616XD Cone spacer HM124646XC Code 350 tolerances AP Integrated Bearing AssembliesSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM129848-90219 HM129813XD Cone spacer HM129848XB Recessed end cap K399072-90010 Integrated Assembly CapsSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM129848-90177 HM129813XD Cone spacer HM129848XB Recessed end cap K399072-90010 compact tapered roller bearing unitsSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;
HM136948-90296 HM136916D Oil hole and groove on cup - E31318 Integrated Assembly CapsSeries:LM501300; Cone Part Number:LM501349; Cup Part Number:LM501314; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:41.275 mm; D:73.431 mm; B - Cone Width:19.812 mm; C - Cup Width:16.604 mm; B:21.430 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:0.76 mm; da - Cone Frontface Backing Diameter:48.01 mm; db - Cone Backface Backing Diameter:54.10 mm; Da - Cup Frontface Backing Diameter:71.10 mm; Db - Cup Backface Backing Diameter:65.02 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; a - Effective Center Location3:-3.3 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:16800 lbf; C0 - Static Radial Rating:16700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; K - Factor7:1.46; e - ISO Factor8:0.4; Y - ISO Factor9:1.5; G1 - Heat Generation Factor (Roller-Raceway):23.3; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cg - Geometry Factor:0.0739;

 

 

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications Video

 

Contact Us

Seo-NTN Driveshaft USA CORP.
Address430 Corporate Way Richmond, Kentucky 5475, U.S.A.
Phone(Working Time)1-905-821-3486
Fax
  • Seo-NTN Driveshaft USA CORP.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications Technical Articles

Can you drive with a broken CV joint?
Is It Safe to Drive With a Damaged CV Joint? | AutoblogJan 4, 2016 — These cannot be repaired – only replaced. You can drive on a damaged CV joint for a little while at least, but there's no telling how long it will last Major Bush...
How do you express the life of a bearing?
1 Bearing Life and Load Rating1-1 Bearing life. Bearings are subjected to certain intensity of repeating stress on their track ring and rolling element even during operation under proper loading,  3. Load Rating and Life - NTNspeeds, the basic...
What are the modes of lubrication in plain bearings?
7. Lubrication of Bearings - NTNLubrication of Bearings. In a bearing, lubrication forms a thin oil film on both the rolling surface and sliding surface to prevent metal- to-metal contact Purpose and method of lubrication | Basic Bearing...

compact tapered roller bearing units CATEGORIES

  • AST Bearings
  • CYSD Bearings
  • FAG Bearings
  • FBJ Bearings
  • FYH Bearings
  • IKO Bearings
  • INA Bearings
  • ISB Bearings
  • ISO Bearings
  • KOYO Bearings
  • NACHI Bearings
  • NBS Bearings
  • NKE Bearings
  • NSK Bearings
  • NTN Bearings
  • SKF Bearings
  • SNR Bearings
  • Timken Bearings
  • Toyana Bearings
  • ZEN Bearings
  • compact tapered roller bearing units
  • Air conditioning compressor bearing
  • Air Conditioning bearing
  • Air Compressors bearing
  • 6203 ntn Bearing
  • Ntn 6210 Bearing
  • Ntn 7206 Bearing
  • Timken 399a Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Cylindrical Roller Bearings
  • Deep Groove Ball Bearings
  • Thk Linear Motion
  • Thk Linear Bearings And Rails
  • Curved Linear Guide
  • High Temperature Linear Guide
  • Thk Linear Guide Rails
  • Thk Miniature Linear Guide
  • Thk Linear Guide
More

Customers Who Viewed HM124646-90133 HM124616XD Cone spacer HM124646XC Recessed end cap K399070-90010 Backing ring K85588-90010 APTM Bearings for Industrial Applications Also Viewed

  • HM129848-90177 HM129813XD Cone spacer HM129848XB Recessed end cap K399072-90010 compact tapered roller bearing units
  • Backing ring K85095-90010 Tapered Roller Bearings Assembly
  • HM129848-90219 HM129813XD Cone spacer HM129848XB Recessed end cap K399072-90010 Integrated Assembly Caps
  • HM129848-90176 HM129813XD Cone spacer HM129848XB Timken Ap Bearings Industrial Applications
  • HM129848-90218 HM129813XD Cone spacer HM129848XB Backing ring K85095-90010 AP Bearings for Industrial Application
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Seo-NTN Driveshaft USA CORP.. Copyright © 2017 - 2022 All Rights Reserved.

  • Home
  • Stock Categories
    • AST Bearings
    • CYSD Bearings
    • FAG Bearings
    • FBJ Bearings
    • FYH Bearings
    • IKO Bearings
    • INA Bearings
    • ISB Bearings
    • ISO Bearings
    • KOYO Bearings
    • NACHI Bearings
    • NBS Bearings
    • NKE Bearings
    • NSK Bearings
    • NTN Bearings
    • SKF Bearings
    • SNR Bearings
    • Timken Bearings
    • Toyana Bearings
    • ZEN Bearings
    • compact tapered roller bearing units
    • Air conditioning compressor bearing
    • Air Conditioning bearing
    • Air Compressors bearing
    • 6203 ntn Bearing
    • Ntn 6210 Bearing
    • Ntn 7206 Bearing
    • Timken 399a Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
    • Deep Groove Ball Bearings
    • Thk Linear Motion
    • Thk Linear Bearings And Rails
    • Curved Linear Guide
    • High Temperature Linear Guide
    • Thk Linear Guide Rails
    • Thk Miniature Linear Guide
    • Thk Linear Guide
  • Technical Articles
  • AST Bearings
  • CYSD Bearings
  • FAG Bearings
✖

Home

Stock Categories

Technical Articles

AST Bearings

CYSD Bearings

FAG Bearings

Contact Us